צנטריפוגה רציפה CEPA Laboratory Centrifuge LE

CEPA Laboratory Centrifuge LE For the use as a benchtop-centrifuge in laboratory scale. Housing made of grey cast iron GG 25, with built-on motor and pulley for drive by endless flat belt, equipped with one cylinder for separating two liquids with different density (Type TR) OR one cylinder for clarifying aLiquid from solid (Type K) please indicate in case of an order:SEPARATE or CLARIFY.The cylinder of the centrifuge has a useful length of 190 mm and an inside diameter of 43 mm, content 0,25 l. It is made of stainless steel 1.4571 (SS 316 Ti). Max. throughput 30 l/h (water).The universal motor is adjustable trough a potentiometer the numbers of revolutions are indicated by a digital impulse transmitter. The speed range from 0-12.000 rpm is limited because of natural frequency oscillation, above that variable adjustable till the max. speed of 40.000 rpm.Connected load: 230 V, 50 Hz, capacity approx. 330 watts.Electro-magnetic locking of the belt and spindle covering, the centrifuge can not be started when the cover is open. The cover cannot be opened before standstill of the centrifuge.The electric control, including the necessary regulation starter, 1,5 m connecting cable with connector according to DIN 49441 is mounted on the centrifuge.All tools and cleaning device necessary for the running of the centrifuge are included.Color centrifuge: Composition lacquer RAL 9010 white Different centrifuge color at extra charges!Color switchboard: RAL 7035 light grey Special accessoriesBottom valve - preventing the liquid from running out downwards when the cylinder is stopped.Note: The use of a bottom valve reduces the maximal attainable flow rate.Foil for LE for inlaying into the rotor - for easy removal of the solids, 188X142X0,5mm, PTFE.Cooling coil - made of stainless steel 1.4571, with two outer joint valves, G 3/8" thread