צנטריפוגה רציפה CEPA High Speed Centrifuge Z 41

CEPA High Speed Centrifuge Z 41 In stainless steel execution, in stationaryarrangement, equipped with one cylinder madeof stainless steel 1.4571 for clarifyingliquids, with built-on special motor andpulley for drive over flat belt, footstepbearing with feeder made of stainless steel1.4571, collecting covers madeof stainlesssteel 1.4571;the cylinder for clarifying is made ofstainless steel 1.4571, theoretical content2 l, capacity approx. 200 - 500 l/h, normalclarifyable liquid, number of revolutionsapprox. 20000 rpm. with accelerating gyro;with special centrifuge motor for high startingtorque, three-phase, with built-inposistor feelers 130 degrees Celsius;with centrifuge control in switchboard, installedon the centrifuge, including allhand-actuated auxiliary switches necessaryfor the function, as well as emergencyshutdownand electro-magnetic locking ofThe spindle protective sleeve, the spindleprotective sleeve can only be released afterstandstill of the cylinder, supervision by a proximity switch;Connected load: 400 V, 50 Hz, approx. 0,9 kW;With various tools for operation of the centrifuge,as well as cleaning device.The motor has a run-up time of approx.50 seconds. The starting current is 7,2 times the nominal current.Color centrifuge: Composition lacquer RAL 9010 whiteDifferent centrifuge color at extra charges!Color switchboard: RAL 7035 light greySpecial accessoriesBottom valve- preventing the liquid from running out downwards when the cylinder is stopped.Note: The use of a bottom valve reduces the maximal attainable flow rate.Spare cylinder- made of stainless steel 1.4581Cylinder bottom holder- made of stainless steel for easy assembly ordismounting of the accelerating gyro or theMaterial 1.4571/316TiPTFE foil for inlaying into the rotor - for easy removal of the solids, 188X142X0,5mm, PTFE.Cooling coil - made of stainless steel 1.4571Infinitely variable speed control - by frequency converter with potentiometer, speed indicator and interference tension filter. Because of technical/physical reasons only adjustable between approx. 50-100%.Please note: the adjustable range of the speed will be narrowed when using a bottom valve.